Dongying Tousin Precision Metal Ltd.
English
Português Español 简体中文
Marine Bearing Bush Marine Bearing Bush Replacement Method Description Overview
Source: | Author:佚名 | Published time: 2023-02-13 | 91 Views | Share:

Marine bearing bush is the part of the contact between the sliding bearing and the journal. The shape is a tile-like semi-cylindrical surface. It is very smooth and generally made of wear-resistant materials such as bronze and antifriction alloy.
Marine bearing bush shall maintain a certain degree of tightness with seat hole to prevent loosening and rolling during work. The size, cylindricity and roundness of the internal seat hole of the Marine bearing bush should meet the requirements, and there should be a sense of labor-saving. If the bearing bushing is easy to install, it means that the Marine bearing bush bearing bushing is not elastic enough or the bearing bushing height is too small.

When the Marine bearing bush is in free state, the two end faces should be higher. When the bearing pad is pressed to the middle of the bearing seat, the end face should be higher than the boundary plane of the bearing seat. When the bearing cap is screwed too tight, the Marine bearing bush will deform to too small a height, and there will be a gap at the joint, and the tightness of the Marine bearing can not be guaranteed, resulting in loosening and rolling in the work. If it is too high, it can be filed or put the sandpaper flat on the glass, and the height of the tile that is too small should be selected again.