When people use non-standard parts of stainless steel plates, if they operate incorrectly, the non-standard parts of stainless steel plates will crack, so why is that? What should be done?

Although stainless steel non-standard parts have corrosion resistance and are very strong, the key is its passivation treatment ability. If the stainless steel plate is under the natural environment standard that can be passivated and has a smooth coating on the surface, it will have strong corrosion resistance and the rate of all-round corrosion will be very low. However, if the surface layer of the stainless steel plate cannot produce a coating, or the resulting coating is not stable enough, then its corrosion resistance will be ineffective, especially in sulfuric acid, the stainless steel plate is not easy to be better than carbon steel.

More importantly, if the part of the coating is damaged but cannot be repaired, the exposed stainless steel passivation will generate positive and negative electrodes with the undamaged part of the surface layer, which will cause corrosion of the rechargeable battery, which will accelerate the partial corrosion and appear. Pitting corrosion, crevice corrosion and other conditions make the corrosion condition worse.

In fact, people use stainless steel non-standard parts in production and daily life. The types of stainless steel non-standard parts used in different natural environments and regions are different, just like the application of stainless steel non-standard parts. Because in some natural environments, the screws must have the necessary anti-corrosion, anti-rust treatment and other functions.

1. The adaptability is stronger. For non-standard parts of stainless steel plates, considering the specifications of the external thread of the male parts, all of them can be applied. It can be seen that stainless steel screws are relatively better than traditional chemical bolts. The scope of language application is more general.

2. The installation is simpler. The previous traditional chemical bolts were very complicated in the whole process of installation, but the whole process of non-standard stainless steel plate parts is relatively simple at the time of installation, which gives many of users have improved the level of convenience.

3. There are fewer and fewer problems encountered during installation. People don't have to worry about the skew when the traditional chemical bolts are turned. The non-standard stainless steel plate parts are based on the corrosion resistance of stainless steel screws and the root cause of cracking. People are installing stainless steel When the board is non-standard, holes can be opened immediately, and then people can install it again, so that the pass rate can exceed nearly 100%.

4. There is no confusion when it is not needed. If people make up for the hole in the non-standard stainless steel plate, or remove the extra ones, it can ensure the safety of people, which is also very simple and does not endanger Beautiful and generous.

There are many types of non-standard parts of stainless steel plates. There is no very standard classification at this stage. Usually, companies are used to develop independent products according to the sales market and the development trend of their own well-known brands to broaden the vitality of the products.

1. Early communication and communication to clarify the customer's customized regulations.

2. Design drawings, people will maintain communication with customers anytime, anywhere.

3. The stainless steel plate is made of non-standard parts, and raw materials are purchased. After people design the engineering drawings, the next step is to prepare for production in advance. The purchase of raw materials is an indispensable production process. In allocating production and manufacturing, there are many factory staff, and people must carry out effective plans and assignments for the progress and work content of each post. At the beginning of production, people will have professional merchandiser staff to undertake the progress of each product, and people will also let customers know the progress of the products that have been made in a short time.

4. Inspection and inspection of commodities. After manufacturing and production and processing, people will have quality inspection staff to inspect or assemble the commodities. People will ensure that the quality of the commodities is up to standard and install customer regulations to carry out production and manufacturing.

5. Non-standard parts of stainless steel plate packaging freight logistics, packaging goods, people use wooden boxes to package goods or package goods according to customer regulations. For distribution, people will look for the best freight logistics method and then sufficient.

6. Customer engineering acceptance.