1. Mold material is put into aluminum or stainless steel container according to the formula and heated (below 90 degrees) to melt

2. Pour the melted wax liquid (60-70 degrees) into the wax mixing machine, and then put 50-60% of the wax pieces into the machine, start the wax mixing machine for strong mixing, until the mold material is uniform paste without hard points

3. Pour the wax paste into the insulated bucket and control the temperature at 56-58 degrees

4. Remove the mold before pressing the wax, clean the working surface of the mold, and apply the release agent

5. The preheating temperature of the wax injection gun is about higher than the wax paste temperature

6. Hold the pressure for an appropriate time after wax injection, so as not to cause deformation of the wax mold. Cool the mold in ice or cold water when the mold temperature is too high

7. Pay attention to the molding parts to prevent deformation and cracking

8. Check the wax mold, whether it is pressed or deformed, remove the wax mold flash, burr, etc. Clean the wax cutting, and then according to the geometric shape, according to the deformation position into the box, prohibited any stacking

9. Wax mold storage temperature does not exceed 30 degrees.